Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. For more of Murdock's articles, see the "Steamboat Biographies" category The steamboat whose history is recorded today was the third and last vessel built and named in honor of its builder- Thomas Collyer. She served on various routes for 51 years and was finally dismantled at Staten Island. The wooden hull of the Thomas Collyer was constructed at New York in 1863. She was 196 feet long, breadth of beam 29 feet, depth of hold eight feet six inches. Her tonnage was listed at 596 gross and 410 net tons, and she was powered with a vertical beam engine with a cylinder diameter of 50 inches, with a 12 foot stroke. Thomas Collyer, for whom the steamboat was named, had the reputation of building some of the fastest inland steamboats in America. The launching of the “Thomas Collyer” marked the completion of 37 years of steamboat construction for the builder and was also the last vessel which he built. It was the third steamboat launched under the name “Thomas Collyer.” Soon after her appearance in New York harbor and on the Hudson river, the “Thomas Collyer” gained the reputation of being an exceptionally fast vessel. It was claimed that she could attain a speed of 21 miles per hour and this brought her the title of “Queen of the One-pipe Steamboats.” The first regular run of the “Thomas Collyer” was between New York and Newburgh in opposition to the famous “Mary Powell,” “Queen of The Hudson.” The “Thomas Collyer” left the north side of Jay street pier in New York at the same hour as the “Mary Powell,” but her term of service in opposition to the famous “Queen of The Hudson” did not last long. The excursion business on the Hudson river and Long Island Sound was next invaded by the “Thomas Collyer,” and in 1869 she was purchased by John H. Starin and placed in service on the North Shore Staten Island and New York ferry route in line with the steamboat “Black Bird.” The “Thomas Collyer” continued on this route until 1879, when the ferry franchise was purchased by the Baltimore and Ohio Railroad Company, which consolidated the ferries at St. George and built modern ferryboats. About this period John H. Starin built a museum at Glen Island, and the “Thomas Collyer” was placed on the Glen Island route with the rest of the Starin fleet. In 1882, the “Thomas Collyer” was rebuilt at Noank, Connecticut, renamed the “Sam Sloan,” and returned to service on the Glen Island route, where she remained until 1904. The following year found the former “Thomas Collyer” again in the excursion business on the Hudson river and Long Island Sound. About 1910 the Starin fleet was purchased by the McAllister Steamboat Company of New York, and the “Sam Sloan,” renamed the “Atlas,” was placed in service on the Glen Island route. The former “Thomas Collyer” was in service until 1914, when she was found to be of no further use. She was taken to Port Richmond, Staten Island, and dismanteled. Her boiler and engine were removed and the hull sold to a yacht club in Greenville, New Jersey, for use as a club house. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. If you enjoyed this post and would like to support more history blog content, please make a donation to the Hudson River Maritime Museum or become a member today!
0 Comments
Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. For more of Murdock's articles, see the "Steamboat Biographies" category. No. 3- Isaac Newton The “Isaac Newton" was built for William H. and Curtis Peck in 1846 (sic). The hull was of wood, constructed by William H. Brown, and her engine was a product of the Allaire Iron Works. Her original length was 38 feet but she was rebuilt in 1885 and was thereafter 405 feet in length. The intentions of the owners were to use the new boat as a dayliner and to name her the “George Washington,” but while she was still on the ways she was sold to the People’s Line, who had her christened the “Isaac Newton” in honor of one of the principal owners of the line, who was a pioneer steamboat man. The “Isaac Newton” had but two decks during the first nine years of her existence, but she was rebuilt in 1885 by John Englis of Greenpoint, and a third tier of staterooms was added, thus making her the second three-decker to appear on the Hudson river; the first being the “New World,” which had a third deck added the previous year. The “Isaac Newton” and the “New World,” when rebuilt into three-deckers were the most beautifully furnished and numbered among the celebrated steamboats of the world. The two upper decks, aft of the engine trunk, were arranged in the form of large apartment galleries, and the ceiling of these decks sported enormous glass chandeliers, lighted by gas. The effect of this decoration was pronounced the most beautiful that had been conceived and the novel arrangement was copied not only on many paddle-wheel boats but on large ocean steamships as well. The “Isaac Newton” met her fate December 5, 1863. She left the foot of Cortlandt street at 5 o’clock in the evening, carrying 150 passengers, and when passing Fort Washington point, her starboard boiler exploded, sprinkling the deck with hot coals, and enveloping her from stem to stern with raging flames. The towboat “Herald” of Rondout, with Captain Harry Barber in command, was instrumental in saving many lives at this disaster. In all, 10 passengers lost their lives. By most fortunate circumstances the others were rescued by small boats of the “Herald” and the “Daniel S. Miller.” Among the dead were two brothers who made their home in Troy, named John and James Hodgso. The rescued passengers and crew were landed in Yonkers. The steamer was totally destroyed. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. If you enjoyed this post and would like to support more history blog content, please make a donation to the Hudson River Maritime Museum or become a member today!
Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. For more of Murdock's articles, see the "Steamboat Biographies" category The “Ansonia” was built for the New York-Derby, Conn., route in the year 1848, with George Deming, captain, Frederick Perkins, pilot, and John M. White, chief engineer. She was 190 feet long with a 28 foot beam, and ran on Long Island Sound on the Derby route until 1860, when she was purchased by Brett & Matthews of Fishkill Landing, refitted and renamed the “William Kent.” Under the name of the “William Kent,” this steamboat sailed the Hudson between Fishkill Landing and New York until 1861, when she was chartered by the government for the transportation of troops for the sum of $700 per day. She was employed by the federal government for a period of 77 days and was then discharged from service. About this time the government passed a law which said that unless a steamboat was entirely rebuilt, her name could not be changed. The purpose of the law was to protect the public who might think they were traveling on a new boat when in reality the only thing new would be the name. This law necessitated the name “Ansonia” being again emblazoned on the sides of the “William Kent,” and so under the original name of the “Ansonia” she plied the Delaware river between Philadelphia and Cape May in the year 1862. Following this sojourn at the Quaker City, the “Ansonia” was brought back to New York and placed in service on her former route between Fishkill Landing and the metropolis as a freight and passenger carrier under Captain J.T. Brett. Following this she was sold to the Saugerties Steamboat Company and began regular trips between Saugerties and New York. In the winter of 1892 the Ansonia was rebuilt at South Brooklyn, being lengthened to 205 feet, and her name was changed to the “Ulster,” with a tonnage rating of 780 gross tons or 580 net tons. On November 11, 1897, the “Ulster” ran on the rocks at Butter Hill, just below Cornwall-on-Hudson about midnight and rested there with her stern submerged in the water and her bow on the rocks. She slipped off the rocks and sunk in 30 feet of water. At the time of the accident she was heavily loaded with freight and carried 105 passengers, all of whom were safely landed on shore. A further account of this disaster tells of the “Ulster” leaving New York about seven o’clock in the evening on an exceedingly stormy night. When she reached Haverstraw Bay, a wind storm arose and blew down the river at a rate of about 30 miles an hour. The pilot hugged the west shore of the river so as not to face the full force of the gale. The river was very rough and when opposite Butter Hill, the “Ulster” was blown on the rocky shore and a hole stove in her hull. Most of the passengers were in their berths at the time but they were quickly aroused and gotten off with a minimum of confusion. The “Ulster” was raised and rebuilt and placed in service on her regular route, running until the fall of 1921, when she was taken up to Rondout creek to Hiltebrant’s shipyard and was there rebuilt in the winter of 1922. The Vulcan Iron Works of Jersey City constructed a new boiler for the steamer and her name was changed to the “Robert A. Snyder” in honor of the late Robert A. Snyder who was for many years the president and superintendent of the Saugerties and New York Steamboat Company. She ran on the Saugerties line in conjunction with the steamboat “Ida." On Friday, February 20, 1936, the “Robert A. Snyder” was crushed by the ice as she lay in the lower creek off Saugerties where she had been tied up with her sister ship, the “Ida”, since the Saugerties Line ceased operation some four years before. The water was shallow at that point and the remains of the once famous boat now lies rotting to pieces on the muddy bottom of the Saugerties Creek, a sight that will bring back many memories of the olden days on the Hudson river to any of the old boatmen who were active at the time when the “Robert A. Snyder” was running on her regular schedule. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. If you enjoyed this post and would like to support more history blog content, please make a donation to the Hudson River Maritime Museum or become a member today!
Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. For more of Murdock's articles, see the "Steamboat Biographies" category The tale of the steamboat “Sarah E. Brown,” known for a period in her existence as the “fish market boat,” begins in 1860, travels through the Civil War and comes to the Rondout creek harbor, and finally ends as the wreckers tear apart the remains of the vessel which lost a battle with the ice in the creek and was wrecked beyond repair, in the year 1893. The wooden hull of the “Sarah E. Brown” was built at Brooklyn in 1860. She was 91 feet long, breadth of beam 19 feet five inches, depth of hold five feet eight inches. Her gross tonnage was listed at 45, with a net tonnage of 22, and she was propelled by a vertical beam engine with a cylinder diameter of 24 inches with a six foot stroke. As can be ascertained from the above dimensions, the “Sarah E. Brown” was a small side wheel steamboat, which was built for towing service in and around New York harbor. There were many vessels similar to the “Sarah E. Brown” in use for the same purpose at that period in steamboat history. Shortly after the outbreak of the Civil War in 1861, the “Sarah E. Brown” was taken over by the war department and placed in service on the Potomac river, being used principally in places where the river was too shallow for the larger vessels to navigate safely. In 1865, at the close of the war, the “Sarah E. Brown” was brought north to the Brooklyn Navy Yard and tied up, and the following year she was sold to Thomas Cornell along with another side wheel steamboat, the “Ceres.” These two vessels, both painted black according to the practice of the federal government during the war, arrived at Rondout and were used for towing purposes in and around the Rondout creek. Under the command of Captain Sandy Forsythe, the “Sarah E. Brown,” with Peter Powell as chief engineer, became a familiar sight along the river in the vicinity of the mouth of the Rondout creek. The year 1869 marks the event which brought the nickname of the “fish market boat” to the “Sarah E. Brown.” A collision with an ice barge stove in the wheelhouse of the “Sarah E. Brown” carrying away much of the woodwork and leaving only the letters S.E.B. of her full name. Immediately some wag along the docks found the three letters could be the initial letters to the words “suckers,” “eels” and “bullheads,” and so the “Sarah E. Brown” came into the name of the “fish market boat.” During the winter of 1870 the “Sarah E. Brown” was rebuilt at Sleightsburgh by Morgan Everyone, and Major Cornell was asked what name he wished for the rebuilt craft. It is reported that Major Cornell in turn asked Captain Sandy Forsythe what name he thought would be appropriate, and the captain replied that the name “Sandy” would do. Thus the “Sarah E. Brown” became the towboat “Sandy.” The “Sandy” was in use around the Rondout harbor until the fall of 1892, and then it was an accident which occurred during the period when she was tied up for the winter, that brought the career of the “Sandy” to a close. N March 13, 1893, the ice in the upper section of the Rondout creek broke loose due to a spring freshet, and thousands off tons of ice rode the raging torrent down the creek. The onslaught of this mass swept many of the tied-up vessels from their moorings, and the side of the “Sandy” was crushed, causing the wrecked steamboat to sink. She was raised but was found to be in such condition that she was no longer of any use, and she was sold to Jacob Herold and broken up at Rondout. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. If you enjoyed this post and would like to support more history blog content, please make a donation to the Hudson River Maritime Museum or become a member today!
Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. For more of Murdock's articles, see the "Steamboat Biographies" category. The history of the “James B. Schuyler” is perhaps one of the most colorful of any of the old Hudson river steamboats, although the vessel was not too large, being only 195 feet long, but possessed of great speed for her size. She was built in 1863 for service in New York waters, plying on several short routes out of New York harbor. In 1867-1868 she was in service on the Bridgeport-New York route running in line with the steamer “Bridgeport.” Then in the winter of 1874, Commodore Hancox purchased the “James B. Schuyler” and this was the beginning of her career as one of the most colorful steamboats ever to ply the Hudson river. Commodore Hancox had been operating the steamboats “Connecticut” and “C. Vanderbilt” on a night line between New York and Troy for several years but had been forced off the route in the summer of 1872 by the Citizens Line of Troy. In the spring of 1874 Commodore Hancox placed the “James B. Schuyler” in service, competing with the Troy and Albany lines- and then the fun began, lasting until at one time the fare between the metropolis and Troy and Albany was only ten cents. The “Sunnyside” of the Troy Line and the “Drew” of the People’s Line of Albany were the chief rivals of the “James B. Schuyler,” and the captains of the three vessels resorted to all kinds of schemes to give their boat the advantage in the race for the lion’s share of the business. Several of the incidents recalled by Mr. Murdock relative to this keen competition are extremely amusing. Working on the ill-fated “Sunnyside,” along with William Fairbrother of Port Ewen, Mr. Murdock was an eyewitness to these various pranks which were written into the record of the “Schuyler.” One of the favorite tricks of the skipper of the “James B. Schuyler” was to pull up along side of one of the opposition vessels such as the “Sunnyside” and then strike up the band aboard the “Schuyler.” The passengers aboard the other boat would crowd to one side of the vessel to better enjoy the music and this would cause the boat to list to one side, raising one paddle wheel out of the water and cause the vessel to lose speed and let the “James B. Schuyler” forge ahead to the next landing. On one such occasion the “Schuyler” was playing this trick on the “Sunnyside” when the “Dean Richmond” passed both vessels. The “Schuyler” immediately took out after the “Richmond,” caught up with her, and began the band playing all over again. The resourceful skipper of the “Dean Richmond” ordered the safety valves on his boat to be lifted, thus making a terrific racket and drowning out the band aboard the “Schuyler” so his passengers could not hear and therefore would not rush to one side of the steamboat. Another incident told by Mr. Murdock records the happenings of a rainy night at Albany. The “Schuyler” docked at the Albany landing above the “Dean Richmond” and along the railroad tracks, waiting for passengers from the train. Clem Hancox, son of the owner of the “Schuyler,” went ashore with a red lantern under his coat, and when the train came along, he waved the danger signal, stopped the train, and while the train crew were investigating to find out why the engineer had stopped the train above the station, the train passengers, believing the station had been reached, left the train and flocked aboard the “Schuyler.” When the train finally arrived at its regular destination, there were no passengers left for the “Dean Richmond.” Old Commodore Hancox at one time had decided that he would pay no wharfage at the Troy landing. so the train owners built a high board fence around the landing of the “James B. Schuyler.” When the steamboat pulled into the dock there was no place for the passengers to land. The Commodore’s men were immediately ordered ashore with axes and bars, and soon the high board fence was only a mass of splintered lumber floating away down the river. The police were called and the crew of the “Schuyler” was escorted to the city jail. Then it was that the Commodore decided to pay the usual wharfage. The “James B. Schuyler” continued running as an opposition boat until the fall of 1875, and in the winter of that year the People’s Line and the Citizens’ Line united to buy off Commodore Hancox and bring an end to the destructive competition which was ruining the business of all three of the companies. The “James B. Schuyler” was used for excursions around New York Harbor during the summer of 1876 and was then stripped of her staterooms, her boilers placed in the hold, and she was converted into a regular excursion boat. Later she was used on the Fishing Banks run, continuing here until 1896, when on October 18, as she was laying at her wharf in New York, she caught fire and was totally destroyed. Her hull was sold and taken to Port Washington on Long Island, where it was broken up. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. If you enjoyed this post and would like to support more history blog content, please make a donation to the Hudson River Maritime Museum or become a member today!
Sometimes you run across history when you least expect it. In selecting today's steamboat biography, chosen on a whim for the name, we unexpectedly encounter steamboat captain Samuel Schuyler. Schuyler was a Black steamboat captain based in Albany operating in the 1840s and, as you'll see from the article below, a shrewd and savvy businessman. His sons later took over the family towing business. You can learn more about the Schuyler family in one of our past blog posts "Exploring the History of the Black Hudson River Schuylers." Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. For more of Murdock's articles, see the "Steamboat Biographies" category The “Rip Van Winkle” was built for the Hudson river, to run between New York and Albany as a day boat. The career of this vessel forms one of the most interesting chapters in steamboat history on the river which carried the historic “Half Moon” in her quest for a short route to India. George Collyer built the wooden hull of the “Rip Van Winkle” in 1845, and her horizontal half-beam engine was built by W.A. Lighthall. She was 242 feet, three inches long with a breadth of beam of 25 1/2 feet. She was rated at 640 tons. Her cylinder was 50 inches with a 10 foot stroke, and she carried two iron boilers on the guards, each boiler being 28 feet long with a 7 1/2 foot shell diameter. When she first appeared, the “Rip Van Winkle” was a wonder both in performance and appearance, and she was dubbed the “steam yacht.” She was placed on the Day Line in opposition to the Troy boats, “Niagara” and “Troy,” but she failed to make the time required and was hauled off the route. Staterooms were added to the “Rip” and she then became a night boat competing with the old People’s Line and with the famous steamboat “Belle.” The “Express” was running with the “Rip Van Winkle” at this time- making three different night lines running out of Albany in 1845. Towards the end of this season, the People’s Line bought the “Rip Van Winkle,” and in 1846 she was sent to the Delaware river to run between Philadelphia and Cape May. In the fall of 1846 the “Rip” was returned to New York by the People’s Line and was placed in service in opposition to the “Belle,” the only opposition vessel to the People’s Line during that period. One morning when the “Belle” arrived in New York, her captain, Samuel Schuyler, found the “Rip Van Winkle” berthed in the slip at Park Place. Old Captain Schuyler was incensed at this action and posted bills that he would continue to operate despite all opposition, and would carry passengers to Albany free of charge [editor's note - to undercut the "Rip Van Winkle" and drive them out of business]. This was the only time in the history of the Hudson river that passengers were regularly carried on river vessels for no charge, although in later years various opposition lines did charge as low as 25 cents per person. The result of this move on the part of the foxy old captain was the retirement of the “Rip Van Winkle” from the field, leaving the “Belle” to run the balance of the season alone. The following year Captain Schuyler purchased the “Rip Van Winkle” and ran her in opposition to the People’s Line until 1851 when he sold her to Daniel Drew and retired from passenger traffic, devoting his time to the towing business. Daniel Drew rebuilt the “Rip Van Winkle” and during the year of 1852 ran her to Albany. Then he sold her to Captain Jacob H. Tremper who placed her in service between Rondout and New York. Later the “Rip” worked out of New York as an excursion boat, and then in 1859 she returned to Hudson river traffic, running out of Coxsackie. In 1865 she was placed on the Troy route, running in line with the “C. Vanderbilt.” She remained on this line under the direction of Captain O.T. Simmons, until 1867 when she again went to New York for excursion purposes. During 1870 the “Rip Van Winkle” ran to the Fishing Banks, and then in 1871 she was purchased by Thomas Cornell of Rondout. In the spring of 1872 she was chartered to the Citizen’s Line, taking the place of the “Thomas Powell.” On April 16, 1872, while on her way from Troy to New York, the “Rip Van Winkle” ran into the Maiden Lane bridge at Albany, carrying away her starboard wheel and shaft, and seriously damaging her engine and hull. No lives were lost in this accident, but the “Rip” was taken to Port Ewen and laid up until 1879. In the fall of that year, the “Rip Van Winkle” was towed to Rondout where her boilers and engine were removed. Back she went to Port Ewen, and there her hull was broken up by Daniel Bigler in the year 1880. Today the bell of the “Rip Van Winkle” can be seen by local residents, hanging in the tower atop the Cornell Shops in Rondout- a reminder of the once fine steamboat which sailed the waters of the Hudson. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. If you enjoyed this post and would like to support more history blog content, please make a donation to the Hudson River Maritime Museum or become a member today!
Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. For more of Murdock's articles, see the "Steamboat Biographies" category Most of the steamboats built during the period before the Civil War were originally passenger vessels, and it was only in the later years of their service that they were rebuilt for towing purposes. Not so with the steamboat “Pittston”- she was one of the few sidewheel vessels built purposely for towing on the Hudson river, and she was in use for 57 years, hauling heavily laden barges on the river. The wooden hull of the “Pittston” was built at New York in 1852. She was 108 feet long, breadth of beam 20 feet, depth of hold six feet, and her gross tonnage was rated at 74 with net tonnage at 58. The Allaire Iron Works of New York built her vertical beam engine which had a cylinder diameter of 32 inches with an eight foot stroke. The “Pittston” was constructed for the Pennsylvania Coal Company and was considered one of the finest vessels of her type to appear on the Hudson river. During this period the offices and yards of the Pennsylvania Coal Company were located at Port Ewen and the towboat “Pittston” was placed in service towing canal boats off the Delaware and Hudson Canal from Eddyville to Port Ewen. She was under the command of Captain Thomas Murry with James Mollin as chief engineer, and she continued on this route for a period of 13 years. In 1865 the Pennsylvania Coal Company moved its headquarters to Newburgh and the towboat “Pittston” was purchased by Thomas Cornell of Rondout. For the following five years the “Pittston” towed out of Rondout along the river to various ports, and in 1871 she was placed in regular service between Rondout and the city of Hudson. A year later, 1872, found the “Pittston” in service on the route between Rondout and Newburgh, towing in line with the towboats “Frank Carter,” “Ceres” and later the “Isaac M. North” of the Cornell Line. The crew of the “Pittston” during the years of the Newburgh run are listed as captain, William Roberts; pilots, Wash Saulpaugh and Joel Rightmyer; chief engineer, James Purdy. In the year 1875 the “Pittston” was withdrawn from the Newburgh route and placed in service between Rondout and Eddyville on the Rondout creek, taking the place of the steamboat “Maurice Wurtz” which had been towing on this route since 1857. The “Pittston” was used for towing the canal barges of the Delaware and Hudson Coal Company from tidewater at Eddyville to Rondout and she was under the command of Captain George E. Dubois, with Alonzo Woolsey as chief engineer. The “grand old days of the Delaware and Hudson Canal” came to a close in 1898 when the canal was abandoned, and the towboat Pittston” was then used around the Rondout harbor and as a helper for tows on the river. In September 1909 the “Pittston” was found to be in an advanced state of wear, and she was sold and broken up after 57 years of continuous service as a towboat. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. The Pittston is one of many wrecked and abandoned boats in and around the Rondout Creek. To learn more about shipwrecks and other vessels, take one of our new Shipwreck Tours aboard our 100% solar-powered tour boat Solaris! If you enjoyed this post and would like to support more history blog content, please make a donation to the Hudson River Maritime Museum or become a member today!
Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. For more of Murdock's articles, see the "Steamboat Biographies" category. Last week we had Captain William O. Benson's account of the Rensselaer and her unusual winter excursion. Today we learn more about the vessel herself. No. 176- Rensselaer The tale of the steamboat “Rensselaer” has yet to be completed, but she will remain a familiar figure to the present generation who remember her sailing up and down the Hudson river. The steel hull of the “Rensselaer” was built by T.S. Marvel & Company at Newburgh in 1909- a sister ship, the “Trojan,” being constructed at the same time. Her engine was the product of W. & A. Fletcher Company of Hoboken, and her joiner work was executed by Charles M. Englis of Greenpoint, New York. The dimensions of the “Rensselaer” are listed as: Length of hull, 317 feet three inches; breadth of beam, 42 feet three inches; over guards, 75 feet; depth of hold, 12 feet five inches; gross tonnage, 2690; net tonnage, 1790. She was powered with a vertical beam engine, diameter of cylinder, 72 inches, with a 12 foot stroke. Her wheels were of the feathering type, 27 feet outside diameter of the buckets, which were 11 by five feet in width. The “Rensselaer” was built for the Citizens’ Line for night service between New York and Troy. She sailed on her maiden trip on Saturday evening, July 3, 1909, from New York up the river, under the command of Captain Charles H. Bruder with William Fairbrother as chief engineer, and her initial run proved that she was the equal of her recently-built sister ship, the “Trojan.” Known for her magnificent furnishings, the “Rensselaer” soon gained prominence on the river. She is completely steam-heated, equipped with electricity, licensed to carry 1,200 passengers, has 240 state rooms, carried in three tiers of galleries above the main deck. Several of these staterooms have private baths attached- these baths being tiled in white with all modern appliances. In every respect both the “Rensselaer” and the “Trojan” were in keeping with the standards of Hudson river steamboats. The “Rensselaer” and “Trojan” were in service on the Troy run until the spring of 1918, when they were placed on the Albany and New York route, replacing the steamboats “Adirondack” and “C.W. Morse,” which were taken over by the federal government to house recruits at the Brooklyn Navy Yard. At the close of the first World War the government returned the two river steamers from service at the Brooklyn Navy Yard, and the “Rensselaer” and her sister ship were returned to the Troy-New York route- running until the fall of 1927. The next recording of the career of the “Rensselaer” is dated 1935, when, during the winter months, the “Rensselaer,” “Trojan” and “Berkshire” were purchased by Sam Rosoff of New York. During 1935 and 1936 the three vessels were in operation under the Rosoff banner, and then in 1937 only the “Trojan” and the “Berkshire” were in service. What will be the end of the “Rensselaer” is yet unknown, but one noteworthy event in her career that should be recorded was the mid-winter excursion carried by the “Rensselaer” on January 29, 1913. On this date over 300 members and friends of Troy, No. 141, Benevolent and Protective Order of Elks, chartered the “Rensselaer” for an excursion down the Hudson river. Amid floating ice cakes and falling snowflakes, the “Rensselaer” and her party of merrymakers sailed down the Hudson for several miles and back again. Approximately three hours were consumed in this mid-winter excursion- an event that may never again be equaled in the pages of Hudson river steamboat history. The U.S. government took an option on the “Rensselaer” and towed her to Hoboken, N.J. in early February 1941 for possible war use as housing. She was not used and was cut down into a barge, the “James River,” which was scrapped in the early 1960s. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. For more of Murdock's articles, see the "Steamboat Biographies" category No. 72- Air Line Today we delve into the archives of Mr. Murdock’s steamboat collection to learn of the history of a ferryboat which ceased operating between Saugerties and Tivoli just 23 years ago. Many of our readers will well remember this vessel as she was somewhat of a curiosity as far as her type was concerned. The “Air Line” was a wooden hull vessel built at Philadelphia in 1857. She was 73 feet long, breadth of beam 20 feet, depth of hold six feet, five inches, gross tonnage 71, net tonnage 52, and she was powered with a vertical engine. Originally this odd ferryboat was constructed for the Air Line Railroad Company of Pennsylvania and was one of the first of the walking beam type ferryboats ever constructed in this country. Her great bar walking beam coupled with the fact that she had only one bow instead of the customary two which are the rule for ferryboats, labeled the “Air Line” as a distinct curiosity. The “Air Line” also holds a doubtful record of having made the trip from Philadelphia to Sandy Hook via the Atlantic Ocean; her owner refusing to pay toll charges to the New Jersey canals. A photograph in the Murdock collection shows the “Air Line” with her one bow, long narrow alleyways separated by the engine house down the center of the vessel. An octagon-shaped pilot house stands atop the engine house with the great bar walking beam directly behind and a high smokestack rising from the middle of the steamboat. Lifeboats were mounted on the roofs of the side cabins. John N. Snyder operated the “Air Line” when she plied the waters of the Hudson river between Saugerties and Tivoli, and because of her single bow, the vessel had to be turned completely after each crossing. For this reason the fare on the “Air Line” was the largest charged on any ferryboat on the Hudson river - a situation which would make a New Jersey commuter rise up in wrath if he had to pay the of 25 cents each time he crossed the river. The “Air Line” served the public between the two upriver towns for almost 58 years, continuing in service until 1915, when she was deemed worn out and sold to John Fisher, who took her to Rondout and dismantled her. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. See more of Murdock's articles in "Steamboat Biographies". No. 27- M. Martin Built in 1863 at Jersey City for the Catskill and Albany day route, the 191 foot “M. Martin” was considered at that time one of the most handsome boats of her type ever to appear on the Hudson river. And the “M. Martin” has a historic background second to none of the vessels ever to ply the Hudson. Because she was constructed in 1863, shortly after the Civil War broke out, the “M. Martin” was pressed into service under General Grant, and during the latter part of the war she was used as General Grant’s dispatch boat on Chesapeake Bay, carrying troops and messages across the bay and river. The “M. Martin” was known as the “greyhound” of the fleet of inland steamers that served the federal government during the war, and after the fall of Richmond, President Abraham Lincoln and General Grant made a visit to the Confederate Capital aboard the “M. Martin.” At the close of the war the “M. Martin” was brought north and purchased by Romer & Tremper of Rondout who placed her in service on the Newburgh and Albany route, running in line with the “Eagle.” These two boats ran together until August 2, 1884, when the “Eagle” was destroyed by fire and the “Jacob H. Tremper” was built to take her place. In 1899, the “Martin” was sold to the Central Hudson Steamboat Company of Newburgh, and served that company many years. She was an exceptionally fine performing vessel in the ice and was thus one of the first out in the spring and the last boat in at the close of navigation in the fall. On Thursday, June 16, 1910, laden with freight and about 20 passengers, the “M. Martin,” southbound from Albany to Newburgh, caught fire and was beached near Esopus Island on the east shore of the Hudson, where all passengers were taken off in small boats. Captain George Hadley first noticed smoke curling from the pilot’s cabin in increasing volume, so he beached the vessel, saw that the passengers were safely taken off, and then got the “Martin’s” firefighting apparatus working playing streams of water on the flames. It was a matter or about 10 minutes for the water to quench the flames, and with only a scorched pilot house to record her experience, the “M. Martin” proceeded on to Newburgh. After repairs had been made, the “M. Martin” resumed service, running until the fall of 1918, when she was laid up. Then in the summer of 1920, the work of junking the “M. Martin” began. Everything of value was removed from a vessel that had once conveyed a President of the United States, and the hull was purchased by Patrick Doherty to use for dock purposes at Eavesport, a small landing near Malden on the Hudson. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. If you enjoyed this post and would like to support more history blog content, please make a donation to the Hudson River Maritime Museum or become a member today!
|
AuthorThis blog is written by Hudson River Maritime Museum staff, volunteers and guest contributors. Archives
July 2022
Categories
All
|
Hudson River Maritime Museum
50 Rondout Landing Kingston, NY 12401 845-338-0071 fax: 845-338-0583 info@hrmm.org The Hudson River Maritime Museum is a 501(c)3 non-profit organization dedicated to the preservation and interpretation of the maritime history of the Hudson River, its tributaries, and related industries. |
Members Matter!Become a member and receive benefits like unlimited free museum admission, discounts on classes, programs, and in the museum store, plus invitations to members-only events.
|
Support EducationThe Hudson River Maritime Museum receives no federal, state, or municipal funding except through competitive, project-based grants. Your donation helps support our mission of education and preservation.
|