Crossing the Hudson between Newburgh and Beacon; End of the Ferry; Beginning of the Bridge

Hudson River Maritime Museum collection

Editor's Note: This booklet from the November 2, 1963 opening of the Newburgh-Beacon Bridge was recently donated to the Hudson River Maritime Museum.

"The Ferry:
The Newburgh-Beacon Ferry, which has been in operation on the Hudson River between the cities of Newburgh and Beacon, is the oldest in the United States, having been given its franchise from Queen Anne of England in 1743.

Alexander Colden, one of the first English trustees of the Palatine Parish of the Quassaick (the original name for Newburgh), petitioned the honorable George Clarke, Lieutenant-Governor of the Province, for letters patent enabling him to establish a ferry between Newburgh and Fishkill, the early name for the City of Beacon. This ferry was in operation until after the American Revolution when Queen Anne's Charger was considered null and void, and a new ferry was established between Newburgh and Fishkill.

At first sail and row boats were used for ferrying, and it is reported that, "The enterprise was conducted with considerable system." It is most interesting to scan the old records and note the following rates for humans and freight for passage on the boat:
A man – one shilling
Man and horse – two shillings
Calf or hogg – Six pence
Two-horse Wagon (empty) – Ten shillings
Two-horse Wagon (loaded) – Twelve shillings
Empty barrel – Four pence
Full barrel – One shilling
Four-horse Wagon (Empty) – Fourteen shillings
Four-horse Wagon (Loaded) – One Pound
Ton of Iron – Eight Shillings
Hogshead of Run – Five shillings

During the Revolutionary War, General George Washington had his headquarters in the Hasbrouck House in Newburgh and used the Continental Ferry for transporting men and supplies across the Hudson. Baron Friedrich von Steuben, the German aide to Washington who was quartered in the VerPlanck House in Fishkill, made regular trips across the Hudson on that ferry. After the defeat of the British at Saratoga in 1777, General Burgoyne led his army down the east bank of the Hudson, crossed the river on the ferry, marched through Newburgh, and headed for New Jersey.

Since the original Queen Anne Charter did not provide exclusive rights, it was not long before competition began to appear. Martin Wiltsie and Daniel Carpenter formed a new company which continued in operation until 1781 or 1782 when Peter Bogardus, John Anderson, and James Denton established a new ferry line. It is believed that the new company acquired the ferry rights of Colden. Sometime after the war, the charter privileges existing prior to that time were confirmed.

In 1802 the original Colden Charter was sold by his heirs to one Leonard Carpenter for the sum of $2500.00. Three years later the two ferry systems were combined. Sail and row boats were used until 1816, when a horse-driven boat, the Moses Rogers was launched. It was capable of carrying a load of "one coach and horses, a wagon and horse, seventeen chaises and horses, one additional horse, and fifty passengers." The Caravan was the first boat to be propelled by a when in the center. It was run in connection with the sail boat Mentor, and the horse-powered boat, The Dutchess. This last named boat was later converted to steam and renamed The Jack Downing.

In 1828 the Post Boy, later called the Phoenix, was put into service. After that came the Gold Hunter, Fulton, Williamsburg, and the Union. As the 20th Century approached, the City of Newburgh and the Fishkill-on-Hudson were plying between the two cities. In 1912 the Dutchess appeared, and in 1914 the Orange was added to the fleet. These two boats were, of course, named for the two counties opposite each other on the Hudson River. A few years later found the Thomas Powell and the Beacon as new arrivals.

From 1804 until 1835, the Newburgh Ferry changed hands many times. In May, 1835, Thomas Powell bought the system for $80,000 and remained the sole owner until 1850. At that time he deeded the property to his daughter, Mrs Frances E.L. Ramsdell. It remained in the Ramsdell family for 100 years. In 1956 the State of New York purchased the Newburgh-Beacon Ferry from Homer Ramsdell and his sister, Mrs. Herbert R. Odell, and the New York Bridge Authority has been operating it until the completion of the bridge which now spans the river.

In its 220-year history, the Newburgh-Beacon Ferry has seen many notable events. The Hudson-Fulton Celebration in 1909 was one of the most memorable. It paid tribute to the English navigator for whom the river was named and the inventor of the steamboat which was first used on the Hudson. Boats of all sizes and shapes were seen on the river, bedecked with flags, pennants, and lovely ladies in colorful gowns and hats. Then later, from the decks of the ferry, spectators watched the world-famous rowers, the Ward Brothers of Cornwall, and the sculls of many colleges en route to the Intercollegiate Boat Races at Poughkeepsie.

The river and the ferry have seen many changes. First ox-carts came to the dock; then horses and wagons. Later came the steam-driven boats and yachts, to be followed by the railroad. Finally, we entered the Twentieth Century with its horseless motor cars. Ferry boats are much too slow now. Our people must speed over modern roads and incomparable steel structures.

The Newburgh-Beacon Ferry has been an institution on the Hudson River. It is indeed a truism that old boats do not die – nor do they fade away. They live on in the hearts and memories of those of use who have "roots". – Irene E. Wegle, Corresponding Secretary, The Historical Society of Newburgh Bay and the Highlands."

Hudson River Maritime Museum collection

Editor's Note: The following is from Historic Bridges of the Hudson Valley:  https://www.hbhv.org/slideshow-c7hc

Fast Facts
Opened to the Public: North Span: November 2, 1963, South Span: November 1, 1980
Connecting Counties: Orange and Dutchess
Overall Length: North Span: 7,855 feet, South Span: 7,789 feet
Bridge Type: Articulated Deck Truss
Initial Cost: North Span: $19,500,000, South Span: $93,600,000

History
The most traveled of the New York State Bridge Authority’s bridges, the  Newburgh-Beacon Bridge carries more than 25 million crossings a year on Interstate 84.

In February 1951, NYS Assembly Majority Leader Lee B. Mailler of Cornwall introduced a bill calling for test borings to be conducted for a bridge between Beacon and Newburgh. The local Chambers of Commerce as well as civic groups helped mobilize public support for the bill, which was passed and signed by Governor Thomas E. Dewey. Test borings and site surveys were completed and by February 1952, the cost of the bridge was estimated at approximately $18 million, not including legal expenses and the cost of rights of way. 
          
In 1953, Assemblyman Mailler introduced further legislation to authorize actual bridge construction. It was approved but contained no appropriation, leaving the Bridge Authority no way to build it. Work was also prohibited by law until after completion of the Kingston-Rhinecliff Bridge. In 1954, the Mailler-Hatfield Bill was passed by the Legislature, removing the constraints which prevented construction of the Newburgh-Beacon Bridge until after completion of the Kingston-Rhinecliff project. 
          
The Bridge Authority lacked the bonding ability to build both spans at once but the 1955 bond issue which covered the costs of the Kingston-Rhinecliff Bridge also included a $1.2 million development fund to pay design costs and help speed construction of the Newburgh-Beacon Bridge. 
          
During the Harriman Administration (1954-1958) it was decided by the Bureau of Public Roads that the bridge would need to be at least 4 lanes wide to carry an Interstate Highway. Federal aid for the bridge was then approved because it would be part of what would eventually become the Eisenhower Interstate Highway System. The project was delayed however, when 1959 federal funds were redistributed and less money was available. Finally in 1960, at the urging of Governor Rockefeller, the State opted to build a less expensive, two-lane bridge without federal assistance. 
          
In the meantime, other ferries had also begun to operate in the area, carrying passengers between Garrison and West Point, Poughkeepsie and Highland, Kingston and Rhinecliff, Catskill and Greendale, and Hudson and Athens. However, one by one, they all ceased to exist. When NYSBA took over the Beacon ferry in 1956, it had been in poor shape for years and soon became the last ferry route north of New York City. 

The last ferries, the Dutchess, the Orange, (both built by Newburgh shipyards) and the Beacon maintained ferry service until Sunday, November 3, 1963, one day after the opening of the original Newburgh-Beacon Bridge.  Shortly after 5 P.M. that day, the Dutchess and the Orange met at mid-river, signaled a final salute and formally retired the Newburgh-Beacon ferry into history after 220 years.  For $2 drivers crossed the Hudson on the ferry for the last time and returned via the new bridge. 
          
In 2005, the Newburgh-Beacon ferry was revived and now carries commuters from the west side of the river to the train station on the east side where they can catch the Metro-North Hudson Line to Grand Central Station. 
          
In 1997, the Newburgh-Beacon Bridge was ceremonially renamed the “Hamilton Fish Newburgh-Beacon Bridge” in honor of Hamilton Fish, who served as New York Governor, US Senator and United States Secretary of State, and for the five generations of the Fish family who represented the Hudson Valley in Congress, the State Legislature and the Presidential Cabinet from the Lincoln administration through the 1990’s.

Engineering 
​Actual bridge construction began in March of 1961. The span was built using riveting to hold the massive steel beams and plates together.  Each rivet came from the factory with a cap on one end of the shaft.  The red hot rivets would be slid through two pieces of steel by one man.  On the other side, another worker with a riveting hammer would pound the scorching metal into a mushroom shape while the rivet was held in place, so there were now two caps on the rivet, with the steel between.  As the rivets cooled, they would contract and bring the steel tightly together. 
          
The piers for the bridge were constructed using caissons. They were set into the riverbed and driven down to bedrock using the weight of the caisson while the machines dug out the silt below.  The deepest caisson on the Newburgh-Beacon Bridge was set 163 feet below sea level. On November 2, 1963, Governor Nelson Rockefeller cut the gold ribbon on the bridge, opening it to traffic. 
          
Before its construction, it was estimated that the Newburgh-Beacon Bridge would carry 25,000 cars each day, requiring a four-lane design.  When funding became difficult, Gov. Rockefeller had decided that the bridge would never carry that many vehicles, and a two-lane structure would be sufficient.  Unfortunately by 1964, 25,000 vehicles were using the bridge on a daily basis, and traffic jams were becoming a major problem.  The need for greater carrying capacity was critical. 
          
By 1972, the State was considering ways to expand bridge capacity. Completion of new portions of Interstate 84 in Connecticut further increased traffic flow, leading to more problems on the bridge. It was finally decided that a second span would be built on land already owned by the Bridge Authority, south of the first span and that the original bridge would be widened.
          
The new span and the reconstruction of the first were financed primarily by the federal government as part of the Interstate Highway Fund.  Ninety percent of the cost of the $94 million bridge was funded through federal money, leaving just ten percent for the Bridge Authority to finance.  
          
The foundations for the piers were built using caissons and cofferdams. On Pier 7, digging on one side of the caisson went faster than the other, resulting in the whole block being tipped to one side. It took months to set correctly and was a “breath-taker” in the words of one construction company foreman. The bridge’s superstructure was built using new weathering steel, which forms a protective coating and eliminates the need to paint the metal. When it was completed, the Newburgh-Beacon Bridge was the longest bridge in the world constructed from the new weathering steel. 
          
On August 21, 1980 boaters and hundreds of on-land spectators joined to watch the placement of the final section of the bridge. The 2,000 ton span was hoisted by 4 engines and secured in place by 2.5 ton bolts. 
          
Bridge dedication ceremonies took place on November 1, 1980, almost 17 years to the date the original span was dedicated. To commemorate the occasion, a 5-mile race was held through Newburgh and across the bridge. The bridge was officially opened with a motorcade of local officials and dignitaries riding over the bridge (in the wrong direction) from the Beacon toll plaza to Newburgh and back. In 1981, the bicycle and pedestrian crossing opened, only the second to cross a federal interstate. 
          
The original span of the bridge was closed in December 1980 for widening and strengthening. It was repainted to match the protective rust color of the weathering steel on the new span. 
          
​In 2006, the west approach was repaved and a new truck inspection area was built to allow the State Police to conduct inspections in a safe area that would not interfere with regular traffic flow." 

---

If you enjoyed this post and would like to support more history blog content, please make a donation to the Hudson River Maritime Museum or become a member today!​

Donate Now

Join Today