Steamboat Hendrick Hudson

Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. ​

Hudson River Day Line Steamboat Hendrick Hudson arriving at Kingston Point, NY. Hudson River Maritime Museum

For the past 35 summers the steamboat “Hendrick Hudson” has been a familiar on the Hudson river, and even now she awaits the coming of spring when she will sail again under the banner of the Hudson River Dayline.
               
March 31, 1906, marked the launching of the steel hull of the “Hendrick Hudson” at the yard of Thomas S. Marvel & Company at Newburgh, and at that time she was the largest marine craft ever constructed above New York city. Quite a celebration attended the launching of the new vessel, including a special run of the company’s “New York” from her winter berth.
               
W. & A. Fletcher & Company of Hoboken constructed the engine of the “Hendrick Hudson,” and on August 19, 1906, the new vessel made her first trip to Albany. She had cost more than a million dollars and could do better than 25 miles per hour. Her principal dimensions were: Gross tonnage, 2847; net tonnage, 1,598; length of hull, 379 feet, one inch (overall, 390 feet); breadth, 45 feet, one inch (over guards, 82 feet); depth, 13 feet, four inches; extreme draft nine feet, four inches. Her engine was an incline compound with three cylinders and three cranks, having a stroke of seven feet. The high pressure cylinder has a diameter of 45 inches, and the two lower pressure cylinders, 70 inches; horsepower is 6,200; boilers are the Scotch type, two being double-ended and four single-ended, with a working pressure of 170 pounds of steam; wheels are the feathering type, with 12 buckets to each of the two.
               
The appearance of the “Hendrick Hudson” created a stir in river steamboat circles. She was furnished in regal splendor and licensed to carry 5,500 people- the largest licensed passenger capacity in the world; and she continued to hold this honor until 1913 when the still larger “Washington Irving” made her debut. Under the more stringent inspection laws of today, she is permitted to take aboard 5,252 passengers.
               
Immediately upon her appearance, the “Hendrick Hudson” was placed on the Albany-New York route in line with the “New York” and later with the “Robert Fulton,” “Washington Irving,” and “Alexander Hamilton.” In 1933 she was placed on the New York-Poughkeepsie run, making a round trip daily out of New York, and since then she has continued in this service with the exception of occasional trips to Albany and the annual excursion in late August from Kingston and other river cities to Albany.
               
The “Hendrick Hudson” has compiled an extremely fine record with only one accident of any import being recorded in her history. In September 1930, on Labor Day, she had the through run from Albany down river, and that night she left New York to deadhead back to the Capital city in order to come down again the following day with the large crowd of returning vacationists. The night was somewhat clouded by fog, and at Van Wie’s Point, five miles short of her destination, she ran aground out of the west side of the channel. She was fortunately undamaged, was hauled off by tugs the following day, and returned to New York under her own power.
               
Death has recently claimed three of the principal officers of the “Hendrick Hudson”- Captain Alonzo Sickles, First Pilot Harry Kellermann, and Chief Engineer William Van Wie. During the season of 1940 Captain Frank Brown was in command of the vessel, Theodore Conklin was purser, Elmont Nelson and John Garavan  were assistant engineers, Alexander Hickey and Clarence Plank were pilots, and Thomas Kraljik and John Antoncic were mates.
               
At the present time the “Hendrick Hudson” is in winter quarters at Pier 81, North River, awaiting the coming of spring and another year of work upon the mighty river for whose explorer she is named.

Author

George W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. ​

---

If you enjoyed this post and would like to support more history blog content, please make a donation to the Hudson River Maritime Museum or become a member today!​

Donate Now

Join Today