Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. For more of Murdock's articles, see the "Steamboat Biographies" category. No. 32- Escort The “Escort” was built at Mystic Bridge, Conn., in 1863, and was 185 feet long, carrying a gross tonnage of 675 and a net tonnage of 500. She was propelled by a vertical beam engine. Built for service in the east, the “Escort” sailed the waters of the Connecticut river and Long Island Sound and was then chartered to the government in the Quartermaster’s Department during the Civil War. At the close of the war she was brought north again and used in eastern waters until 1873. The “Escort” was then purchased by Catskill people and put in service on the Catskill and New York night line. In 1883 the “Escort” was rebuilt and her name was changed to the “Catskill”. She ran in line with the “Kaaterskill” and “Walter Brett”. On September 22, 1897, the “Catskill was rammed and sunk off West 57th street, New York, about seven o’clock in the evening by the steamer “St. Johns”, owned by the Central Railroad of New Jersey. There were 46 passengers aboard the “Catskill” and all escaped except a five-year-old boy, Bertie Timmerman of Leeds, who was drowned. At the time of the accident, the “Catskill” had an unusually heavy cargo of freight aboard for her north-bound trip. The usual signal whistles were blown but there was evidently a misunderstanding and the two vessels came together with a crash that could be heard for some distance along the waterfront. The excursion steamboat struck the “Catskill” on the starboard side about 30 feet aft of the bow and tore a great hole in her side, the whole depth of her guards and freeboard and way below the waterline. Captain Braisted of the “St. Johns”, seeing that the damage to the “Catskill” was serious and that the vessel would sink, blew his whistle for aid and a passing steamer and some tugs rushed to the assistance of the “Catskill” and took off the passengers. The “Catskill” was raised and rebuilt, being lengthened from 185 to 226 feet two inches, and her tonnage was increased from 675 gross tons to 816 gross tons. Her name was then changed to the “City of Hudson”, and when she made her appearance she gave the impression of an entirely new vessel. The “City of Hudson” continued running on the Catskill line until the fall of 1910, when she was laid up at Newburgh, having outlived her usefulness. She was purchased by Charles E. Bishop of Rondout and Abram W. Powell of Port Ewen in October, 1911, and taken to Port Ewen, where she was dismantled, her engine and boiler being junked and her woodwork used for fuel in burning brick on a brickyard. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. If you enjoyed this post and would like to support more history blog content, please make a donation to the Hudson River Maritime Museum or become a member today!
1 Comment
In working in the archives today with volunteer G.M. Mastropaolo, we discovered this delightful timetable in the Donald C. Ringwald collection. Outlining travel times and locations for steamboats, steam yachts, ferries, stages/stagecoaches, and railroads in Rondout, Kingston, "and vicinity." Among the many time tables is that of the ferry boat Transport. To learn more about the Transport, check out our past blog post about its history and use. Of particular interest to the collections staff and volunteers at the museum was this time table for the steamboat Mary Powell, the star of our 2020 exhibit, "Mary Powell: Queen of the Hudson," opening April 25, 2020. "Handy Book of the Catskill Mountains" was designed for those traveling to the Kingston area for access to the Catskill Mountains and mountain houses. Measuring just 4 by 2.5 inches, this tiny little handbook would fit perfectly in a pocket or lady's reticule. The Hudson River Maritime Museum is pleased to make this handbook available to the public. If you would like to view the entire book, chock full of both traveler's information and period advertisements, click the button below to download a PDF. If you enjoyed this blog post and would like to support the work of the Hudson River Maritime Museum, please make a donation or become a member today!
March, 2020 is March Membership Madness here at the museum. If you join in the month of March, you can receive 20% off (for 2020) any membership level. Learn more. Editor's Note: The following text is a verbatim transcription of an article written by George W. Murdock, for the Kingston (NY) Daily Freeman newspaper in the 1930s. Murdock, a veteran marine engineer, wrote a regular column. Articles transcribed by HRMM volunteer Adam Kaplan. For more of Murdock's articles, see the "Steamboat Biographies" category at right No. 52- New World The “New World” was constructed in 1847 by William H. Brown of New York. When she first appeared she was 371 feet long with a tonnage rating of 1,418. In 1855 she was widened from 37 feet to 43 feet by John Englis of Greenpoint and her rating increased to 1,676 tons. She had a vertical beam engine, constructed by T.F. Secor & Company of New York, with a cylinder diameter of 76 inches and a 15 foot stroke, cutting off at eight feet and averaging 17 revolutions per minute. The “New World” was one of the most celebrated of the American river steamboats and was literally a wonder of her day because of her great size. She was originally built for service as a dayboat between Albany and New York and on this route she gained a reputation for speed. On several occasions her speed approximated 20 miles per hour. In 1854 the “New World” made the run from Albany to New York in six hours and 21 minutes. In the year 1855 she was rebuilt for service as a night boat, becoming the first of the great inland steamers to have a double tier of staterooms above the main deck. The “New World” was always considered an unlucky vessel. From the day of her launching- August 4, 1848, when she moved 30 feet down the ways and stuck, requiring the services of several tugboats to get her into the water, the “New World” began a career which was continually marred by accidents. On June 20, 1853, while off Chambers street, New York, one of the “New World’s” boilers exploded, killing 11 persons. At another time she was almost destroyed by fire off the City of Hudson. One of the most unfortunate accidents which marred the record of the “New World” occurred on October 26, 1859 of Fort Washington while enroute to Albany. In this accident the “New World” went to the bottom of the river, but the circumstances which caused her distress were rather peculiar. A schooner was crossing the bow of the “New World” and the pilot rang the bell to stop the engine. The engineer happened to be in one of the firerooms across the gangway when the signal was given and he hurried to comply with the request. In his haste, he stopped the engine too suddenly, with the result that the strain put on the gallows frame holding up the walking beam, caused it to snap off about five feet from the top, allowing the beam to drop. This broke the connecting rod about two feet from the upper end. The connecting rod continued to work with every revolution of the paddle wheel crank as the boat continued to move at a good rate of speed. The flying end of the severed connecting rod generally wrecked the bulkheads and decks forward and finally worked its way into the hold and knocked a hole in the bottom of the vessel. In half an hour the “New World” was at the bottom of the river. Her passengers were rescued by the sloop and the steamboat “Ohio.” The “New World” was raised and repaired and returned to service on the night line. After a career of 16 years she was laid aside, her engine was placed in the new steamboat “St. John,” and her hull with all of her upper works intact, was taken to Fortress Monroe for use as a hospital during the Civil War. AuthorGeorge W. Murdock, (b. 1853-d. 1940) was a veteran marine engineer who served on the steamboats "Utica", "Sunnyside", "City of Troy", and "Mary Powell". He also helped dismantle engines in scrapped steamboats in the winter months and later in his career worked as an engineer at the brickyards in Port Ewen. In 1883 he moved to Brooklyn, NY and operated several private yachts. He ended his career working in power houses in the outer boroughs of New York City. His mother Catherine Murdock was the keeper of the Rondout Lighthouse for 50 years. |
AuthorThis blog is written by Hudson River Maritime Museum staff, volunteers and guest contributors. Archives
September 2023
Categories
All
|
Hudson River Maritime Museum
50 Rondout Landing Kingston, NY 12401 845-338-0071 fax: 845-338-0583 info@hrmm.org The Hudson River Maritime Museum is a 501(c)3 non-profit organization dedicated to the preservation and interpretation of the maritime history of the Hudson River, its tributaries, and related industries. |
Members Matter!Become a member and receive benefits like unlimited free museum admission, discounts on classes, programs, and in the museum store, plus invitations to members-only events.
|
Support EducationThe Hudson River Maritime Museum receives no federal, state, or municipal funding except through competitive, project-based grants. Your donation helps support our mission of education and preservation.
|